Table of Contents
Advertisement
Function
• Enable Network Standby Mode: Allows the projector to provide the
network function in standby mode.
• Auto Disable Network Standby Mode: When a certain period of time
Standby LAN
elapses without network communication during standby mode, the network
function is disabled. For instance, if you set it to 20 minutes, the network
standby mode will be automatically disabled if there is no network
communication for 20 minutes.
Returns all settings to the factory preset values.
Reset All
Settings
INFORMATION menu
Function
Input
Shows the current signal source.
Image Mode
Shows the Image Mode.
Resolution
Shows the native resolution of the input signal.
Color Format
Shows input color format.
Light Source
Shows the number of hours the light source has been used.
Usage Time
Firmware
Shows the firmware version of your projector.
Version
48
Menu operation
Te following settings will still remain: PICTURE, Aspect Ratio, 4K shift,
Projector Mode, Light Source Mode, EOTF, Audio Settings, Security
Settings, Network Settings, Standby LAN, "Tools" menu in e-Control
page
49, and PJLink password.
Description
Description
®
on
Advertisement
Table of Contents
