Table of Contents
Advertisement
Pay attention to the following points regarding installation and handling of the projector. Failure
to do so may cause a fire, electric shock or personal injury.
Prohibition
Caution
10 Safety instructions
Warning
• Do not install the projector in a location that is damp or dusty, or
where there is a lot of oily smoke or steam. Oil can degrade the
plastic, which could result in a ceiling-mounted projector falling
from its mounting.
• Make sure to implement anti-fall measures such as an anti-fall wire
when installing the projector in high places, for example, installing
it on the ceiling.
• Do not look directly into the exhaust vents during use.
• Do not insert any object into vents in the projector, such as the air
intake vent or exhaust vents.
• Do not place a pressurized can in front of the exhaust vents. The
pressure of the contents of the can may increase due to heat from
the exhaust vents and this could result in an explosion.
• When cleaning off dust or dirt from projector parts such as the lens
or filter, never use any spray that is flammable. Internal parts that
become hot may ignite and cause a fire.
• Do not use adhesives, lubricants, oils, or alkaline detergents for
maintenance of the projector. They could adhere to the cabinet
and damage it, possibly resulting in the projector falling from its
mounting and causing an accident or personal injury.
• As strong light beams are emitted while
the projector is in use, do not look
directly into the projector lens. Doing so
could cause an eye injury. Pay particular
attention to prevent small children from doing so.
• Light from the projector is classified as Risk Group 2 (RG2)
according to IEC 62471-5:2015.
• If children may approach the projector or touch it, always ensure
the projector is used under adult supervision.
• Do not hold or install optical instruments (such as magnifying
glasses, reflectors, or glasses) in the path of light from the
projector. If projected light is refracted or reflected and enters
people's eyes, it may result in eye injury.
• When setting the projector on a high surface for projection, be sure
the surface is flat and stable.
• Do not use the projector on a soft surface such as carpet or
sponge mat, etc.
• For ceiling mounting or other installation work, request service
from a qualified technician or the Canon Customer Support Center.
Poor installation work could result in an accident.
RG2 IEC 62471-5:2015
Advertisement
Table of Contents
