Installation Menu - Canon LX-MH502Z User Manual

INSTALLATION menu

Function
Projector
The projector can be installed on a ceiling or behind a screen. See
Mode
a location" on page
Is used to adjust the image size and focus and
check that the projected image is free from
distortion. To close the test pattern, press MENU
Test Pattern
and select Off.
• Light Source Mode: Selects a suitable light source power from among the
Light Source
provided modes. See
Settings
• Light Source Information: See
We recommend you use the High Altitude Mode when your environment is
between 1,201 m to 3,000 m above sea level, and ambient temperature is
between 5°C–30°C.
Operation under "High Altitude Mode" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall
system cooling and performance.
High Altitude
If you use this projector under other extreme conditions excluding the above,
Mode
it may display auto shut-down symptoms, which is designed to protect your
projector from over-heating. In cases like this, you should switch to High
Altitude mode to solve these symptoms. However, this is not to state that this
projector can operate under any and all harsh or extreme conditions.
44 Menu operation
26.
"Saving power" on page
Do not use the High Altitude Mode if your altitude is between 0 m and 1,200
m and ambient temperature is between 0°C and 40°C. The projector will be
over cooled, if you turn the mode on under such a condition.
Description
55.
"Light source information" on page
"Choosing
55.