Table of Contents
Advertisement
22
6.5 16-Channel Configuration
The 8020-59 can be used in conjunction with the Geokon model 8032 Multiplexer to configure
and monitor up to 16 vibrating wire transducers with thermistors. For wiring details of this
configuration, see Appendix C. The 8020-59 Mode should be set to 16-Channel. Clicking "16-
Channel" (or press the "Alt" and "1" keys) from the Startup dialog displays the 16-Channel
Configuration window:
Figure 17 - 16-Channel Configuration Screen
From this window, all of the transducer information for each of the 16-Channels may be entered.
The transducer type, slope, and limits are stored in non-volatile EEPROM internal to the 8020-
59. All other information is stored to a configuration file on the host computer's hard drive, and
loaded automatically when this screen is displayed. Configurations may also be saved by
clicking the "Save Info" button and may be recalled later by clicking the "Open Info" button.
Advertisement
Table of Contents
