Table of Contents
Advertisement
5. COMMUNICATIONS
The 8020-59 offers a standard 9-pin RS-232 Serial Port for connection to most desktop and
laptop computers (an optional USB to Serial interface adapter is available).
If using a terminal emulator program such HyperTerminal, Putty, etc., for command line set up
(see Section 5.1) of the 8020-59, configure the program's communication parameters as follows:
Port:
Bits per Second:
Data bits:
Parity:
Stop bits:
Flow Control:
5.1 Command Line Interface
When connected to a computer using a terminal emulator program such as HyperTerminal,
typing <Enter> returns the title screen:
Geokon, Inc
8020-59 VW to Analog Interface
Rev 4.0.2
Type ? for Help
*
Typing ? <Return> returns the Help Screen:
*?
COMMAND
C1
C2
C3
D#
D0
E#
E0
ME
MD
U#,ddddd,+/-,g
Max.),slope,gage type
L#,ddddd
RD
RE
N#
N0
Serial port that 8020-59 is connected to (i.e., COM1, COM2)
9600
8
None
1
None
12/05/2011
DESCRIPTION
Single VW and Thermistor
16 VW's and 16 Thermistors
32 VW's
Display Channel # Parameters
Display ALL Channel Parameters (C2 & C3 only)
Enable channel # (C2 and C3 only)
Enable ALL Channels (C2 and C3 only)
Enable output monitor
Disable output monitor
Store Upper digits,channel #,digits (25000
Store Lower digits,channel #,digits (160 Min.)
Ready Disabled
Ready Enabled
Disable channel # (C2 & C3 only)
Disable ALL Channels (C2 and C3 only)
17
Advertisement
Table of Contents
