Table of Contents
Advertisement
8) The installation process is now complete. Clicking "Next >" allows the opportunity to launch
the 8020-59 application when finished by checking the box next to "Launch 8020-59
Application" (see Figure 8). Click on "Finish" (see below) to close the install wizard.
2.1 Configuring the COM Port
After launching the 8020-59 Software Application, the first thing that must be done is to
configure the COM Port. Click on the "Com Setup" (or press the "Alt" and the "c" key at the
same time) to select a COM port for communication with the 8020-59 VW to Analog Converter
(See Figure 9).
Figure 8 - Install Wizard, Launch 8020-59 Application
Figure 9 - 8020-59 Software Application, Startup Dialog
5
Advertisement
Table of Contents
