Table of Contents
Advertisement
Setting the dimmer curve
Proceed as follows to adjust the dimmer curve of the dimmer channels:
1.
Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the 'Curve' menu.
2.
Confirm with [MENU].
ð The display shows 'Curve' .
3.
Use [UP] or [DOWN] to select between 'All' (all channels get the same dimmer curve) and
'Single' (each channel can get an individual dimmer curve).
Confirm with [MENU].
4.
In 'All' mode: Use [UP] or [DOWN] to select the dimmer curve from the options:
'Linear'
n
'S Curve'
n
'Non Dim'
n
'Square'
n
Confirm with [MENU].
In 'Single' mode: Use [UP] or [DOWN] to first select the channel whose dimmer curve is to
be set. Confirm with 'MENU' . Then select the dimmer curve for this channel from the
options:
'Linear'
n
Operating
DPX-620III 6 Channel Dimmer S
dimmer pack
29
Advertisement
Table of Contents
