Table of Contents
Advertisement
Installation and starting up
DPX-620III 6 Channel Dimmer S
16
dimmer pack
DANGER!
Hazardous voltage
Hazardous voltage may be present at cable ends and screw terminals.
The connection of screw terminals as well as all maintenance and repair work on
the electrical installation of the device must only be performed by qualified elec-
trical personnel in volt-free condition. Failure to do so may result in electric shock
and risk of fire and loss of life.
By all means you have to observe all electrical safety instructions applicable at the
place of operation.
The device is designed for mounting in 19" racks, it occupies two rack units (RU).
If necessary, install a CEE plug on the power cord of the unit.
First, connect the loads to the terminals on the back of the device. Establish the DMX link to
the controller. Finally, connect the CEE plug of the device to a CEE socket.
Advertisement
Table of Contents
