Saveo Scan SAVEO-RV2-Z12D Getting Started

SAVEO-RV2-Z12D

Getting Started

Switch on and Charge your Scanner
Please switch on your scanner (as illustrated) and place it in the
cradle to charge for 3~4 hours before rst use.
If you want to charge smartphone and scanner simultaneously,
please switch scanner to right "C" (charge mode) before placing
it in the cradle.
Power on Saveo Scan
On the underside of the scanner you will nd a small recessed
button.
Use a paper clip or tooth pick to push the button until you hear a
noti cation sound.
Ensure power switch remains depressed after you release it.
Power Switch
Power switch is located on the
underside of the scanner.
1
Operating Elements
*Please remove the protective sticker from window
before use
Universal Holder
Exit Window
Trigger/Power
On button
Wrist Strap
'To Device' Cable
Use the appropiate cable type to
connect to smartphone/tablet
Switch for Operation Mode
and Charge Mode/Bluetooth
Mode
LED indicator
Charging Cradle
Optimize Device Charging
Select the Charge & Data model for the device type
by scanning the barcode below:
Micro USB
Type-C
For Optimal Charging, please use the original USB
cable & adaptor supplied with your mobile device.
2
Attach your smartphone
Attaching your smartphone to scanner using the
Extend the retractable arm before placing phone in holder and
then pushing it rmly back against the phone.
Extend retractable
arm
Press button and slide
outwards to extend the
arm
Insert phone
Secure phone in
holder
USB connection typo and port location vary on di erent
models of smartphone, the cable can be con gured for
your speci c model, Micro USB or USB Type-C. For iOS
devices, please use a Saveo Lightning cable.
Micro USB
USB Type-C
universal holder
Connect phone to scanner
3