Saveo Scan SAVEO-RNG-G2 Quick Setup Manual

Scanning with Simplicity
SAVEO-RNG-G2
Unified Quick Set
kage
c nne du e nd
U e c e i iu i n ec
Quick uide
Important Safety Information
Don't put scanner or dock in places of excessively high temperature, such as exposure to direct
sunlight. Don't use scanner in extremely humid conditions or in conditions of extreme
temperature change. Never damage the rechargeable batteries. Damaging the casing of the
rechargeable battery might cause explosion or fire!
TIP:
Quick Setup Mobile (Bluetooth HID)
1.) Enter Pairing Mode
Un-pair/Pair Bluetooth
2.) Enable Bluetooth on
your mobile device
Go to your phone's homescreen
and find "Settings", then
"Bluetooth" and turn Bluetooth
on. Your device will search for
available devices within range.
After approx 20 seconds, Saveo
Scan will appear as an external
keyboard with a unique
identifier serial number (SAVEO-
RNG-G2-xxxxxxx).
ck
Select the scanner from
e e e ie
"Available Devices" and wait for
pairing process to complete.
Once "Connected" is displayed,
your device is paired to the
scanner. Your scanner is now
ready to use.
V 1.1
Scan this barcode code to
disconnect from any
previously connected
devices and put the
scanner into "Pairing
mode".
Please Note: Devices only
need to be paired once.
When they are within
Bluetooth range they will
automatically attempt to
connect to each other. If
you wish to connect to
another device it is
recommended you first
unpair this device.
-1-
Quick Setup PC/MAC (Bluetooth HID Dock)
1.) Connect Dock to USB Port
Simply connect the dock to a free USB port on
your computer using the USB Cable and scan
the dock's barcode to pair & connect your
scanner. The dock is plug and play, so no
driver is required for Bluetooth HID mode.
Transmission Modes
Direct Mode (Default)
Memory Mode
Memory Data Upload
Total Storage Count
Clear Memory
-2-