Solving Paper Problems; Paper Feeding Problems - Epson SureColor T3170 User Manual

Solving Paper Problems

Check these sections if you have problems using paper with your product.

Paper Feeding Problems

Printout Quality Problems
Roll Paper Jam Problems
Cut Sheet Paper Jam Problems
Parent topic:
Paper Feeding Problems
If you have problems feeding paper, try these solutions:
• Make sure paper is loaded in the correct orientation. Load cut sheets vertically (short edge first).
• For best results, follow these guidelines:
• Use new, smooth, high-quality paper that is not damp, curled, creased, old, too thin, or too thick.
• Follow any special loading instructions that came with the paper.
• If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
Then reload the paper.
• Make sure there are no gaps between the roll paper and the paper stops on the spindle.
• If wrinkles appear on roll paper, adjust the Back Tension setting.
• If you cannot insert paper easily into the paper feed slot, make sure the paper is perfectly flat and not
curled.
• Do not load more than one piece of cut sheet paper.
• Make sure your paper meets the specifications for your product.
• Make sure you selected the Media Type setting in the printer driver that matches the paper you
loaded in the product.
• Make sure that paper is not jammed inside the product.
• Make sure you are using the product in the proper room temperature.
Parent topic:
Related references
Paper Setting Menu
Paper Specifications
Solving Problems
Solving Paper Problems
175