Detailed Settings Function - Sanyo AHX0752 Service Manual

3. Timer Remote Controller (RCS-TM80BG)
16. Detailed Settings Functions
• This allows the system address, indoor unit
address, and other settings to be made for the
individual or group-control indoor unit to which the
remote controller used for detailed settings is con-
nected.
When detailed settings mode is engaged, opera-
tion stops at the individual or group-control indoor
unit where the remote controller used for detailed
settings is connected. Simple settings items can
also be set at this time.
<Procedure>
Press and hold the
simultaneously for 4 seconds or longer.
" ," unit No. "
group control), item code "
" " are displayed blinking on the remote
controller LCD display.
At this time, the indoor unit fan (or all indoor unit
fans in the case of group control) begins operat-
ing.
If group control is in effect, press the
button and select the address (unit No.) of the
indoor unit to set. At this time, the fan at the
indoor unit begins operating.
Press the temperature setting
buttons to select the item code to change.
Press the timer time
the desired setting data.
* For item codes and setting data, refer to the
following page.
Press the button.
(The display stops blinking and remains lit, and
setting is completed.)
Press the button to return to normal remote
controller display.
and buttons
,
" (or " " in the case of
," and settings data
/
/ buttons to select
7
1 6
2-33
Remote Control Functions
2
1
5
3
4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8