Sanyo AHX0752 Service Manual page 58

3. Timer Remote Controller (RCS-TM80BG)
Selecting the DC fan motor tap
(when setting with the remote controller)
<Procedure>
Stop the system before performing these steps.
Press and hold the
for 4 seconds or longer.
If group control is in effect, press the
the address (unit No.) of the indoor unit to set. At this time, the
fan at the indoor unit begins operating.
Use the temperature setting buttons to select item code "5d."
Press the timer time
setting data.
* For item codes and setting data, refer to Table 1 – Table 4.
Press the
lit, and setting is completed.)
* If air-blocking material is used, use the same procedure as in
steps (3) – (5) above and change the setting for item code "62"
to "0000."
To change the selected indoor unit, go to step (2).
Press the
1
1
Table 1 Table of DC Fan Motor Tap Settings (4-way Air Discharge Semi-Concealed type)
Setting No. Remote controller setting data
2
2
(1)
3
3
(3)
4
4
(6)
5
Table 2 Table of DC Fan Motor Tap Settings (ceiling-mounted type)
5
Setting No. Remote controller setting data
(1)
6
6
(3)
Table 3 Table of DC Fan Motor Tap Settings (1-way Air Discharge Semi-Concealed type)
7
Setting No. Remote controller setting data
7
(1)
(3)
8
8
and buttons simultaneously
,
/ buttons to select the desired
button. (The display stops blinking and remains
button to return to normal remote controller display.
Standard (setting at time of shipping)
0000
High ceiling setting 1 (for standards panel)
Super long-life filter
Oil guard panel
0001 Oil guard panel with raising / lowering grille
Ammonia deodorant filter
Optical regeneration deodorant filter
High ceiling setting 2 (for standards panel)
Ceiling panel with special raising / lowering grille for high locations
High performance filter (90% by JIS colorimetric method)
High performance filter (65% by JIS colorimetric method)
Air cleaning unit
0003
Optical regeneration deodorant filter for air cleaning unit
Deodorant filter
Air-blocking material (for 3-way air discharge)
Air-blocking material (when a discharge duct is connected)
0006 Air-blocking material (for 2-way air discharge)
0000
Standard (setting at time of shipping)
High ceiling setting
Super long-life filter
0001
Ammonia deodorant filter (65% by JIS colorimetric method)
Optical regeneration deodorant filter
High performance filter (65% by JIS colorimetric method)
0003
Deodorant filter (65% by JIS colorimetric method)
0000 Standard (setting at time of shipping)
0001 Optical regeneration deodorant filter
Deodorant filter (65% by JIS colorimetric method)
0003
Ammonia deodorant filter (65% by JIS colorimetric method)
button and select
6
Purpose of use, names of accessories
Purpose of use, names of accessories
Purpose of use, names of accessories
2-38
Remote Control Functions
1 5
1 4
* Failure to make this setting may result in
decreased airflow and condensation.
2
3