Canon imageFORMULA CR-L1 User Manual page 38

C
Squeeze in both sides of the print position adjustment lever and move
the print cartridge carriage to its lowest position.
D
Push back the ink cartridge lock lever in the direction of the arrow in
the diagram below, and pull out the ink cartridge by grasping the tab
as shown in the diagram.
CAUTION
Do not touch the ink jet nozzle right after imprinting. The nozzle may be very hot.
E
Place the ink cartridge shown in the diagram below.
CAUTION
Do not touch the electrical contact on the carriage. Doing so may
cause a malfunction.
NOTE
Do not use more than one cartridge by rotation. If you do so, applications
cannot check the ink level precisely.
F
Push down the ink cartridge until it clicks into place.
IMPORTANT
Make sure that the ink cartridge lock lever locks the ink cartridge into
the correct position.
Ink Cartridge
Lock Lever
38
If the cartridge does not
load properly, see step 7.