Method Of Use; Operation Of The Odor Sensor - Sanyo ABC-VW24A Instruction Manual

Sanyo air cleaner user manual
Table of Contents

Advertisement

Available languages

Available languages

Method of Use

The device can be operated according to preference. Normally, it is recommended that automatic operation is
selected to operate automatically in response to the cleanliness of the air. When the automatic operation, adjust
the sensitivity of the odor sensor (refer to page E-7).
1
Press the power on/off button.
¡Press the power on/off button to operate in [AUTO/Electrolyzed
Water "On"] mode after plugging in the power plug.
¡The electrolyzed water and clean lamps turn on.
(The electrolyzed water lamp turns on while operating the
electrolyzed water function).
2
Press the fan speed button and operate according
to preference.
¡The operating mode switches with each press of the button and
the mode is indicated by the corresponding lamp.
AUTO
LOW
When cleaning the air and removing
odors in the room automatically

Operation of the Odor Sensor

The odor sensor operate automatically when set to automatic operation mode.
¡The odor sensor responds to cigarette smoke, insecticides, cosmetics, alcohol, gases generated by burning
appliances, and sudden changes of temperature and humidity.
Color of Clean Indicator and Operating Status (Air flow indicator lamp does not turn on)
Cleanliness
Color of Clean Indicator
Fan
Operating
Status
Sterile, Electrolytic Mist
The generated volume of sterile, electrolytic mist is intermittent with Low (small) and Strong (large).
Note:
¡Toxic substances (carbon monoxide, etc.) from cigarettes cannot be eliminated.
¡Odor components (odors from building material, pets, etc.) that are continuously generated
cannot be entirely eliminated.
MED
HIGH
Manual Operation
Clean
Green
Stop
Stop
Automatic Operation
¡Press the fan speed button and operate in "AUTO".
¡Operates automatically when the odor sensor detect dirt or
odor in the air of the room.
¡A sterile, electrolyzed mist is produced (the electrolyzed
water function generates a sterile, electrolyzed mist).
Press the electrolyzed water button to turn off the
electrolyzed water.
¡The electrolyzed water function cannot be operated
independently.
* Even when the air of the room is clean, the electrolyzed
water function operates silently for about 5 minutes, once
every hour, to agitate the water.
Yellow
Low
Low
Press
Press
Press
Very Dirty
Red
Medium
Low or Strong
E-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents