Manual Operation; Power Mist Mode; Timer Operation - Sanyo ABC-VW24A Instruction Manual

Method of Use
Continuous Mode
Operate in "HIGH" when vacuuming
Operate in "LOW" when sleeping
To generate a lot of sterile, electrolytic
mist and quickly clean the air in the room
Bacteria
Pollen
Dust Mite
Droppings
Stopping the operation at a specified time
OFF!
E-9
Odors
Mold

Manual Operation

¡Press the fan speed button to choose
"LOW", "MED", or "HIGH" mode.
¡The volume of sterile, electrolytic mist generated during
High is strong (large). The volume is low (small) for all
other modes. The mist is generated intermittently.
¡Press the electrolyzed water button to turn the electrolyzed
water function "On" or "Off".

Power Mist Mode

¡Press the power mist button to operate in power mist
mode.
¡High (5 min) → Medium (25 min)
(The air flow indicator does not turn on.)
¡A sterile, electrolytic mist is intermittently generated for 30
minutes.
¡Once the power mist cycle is complete, the device
switches to automatic mode.
¡Press the fan speed button to cancel and to switch to a
different operating mode.
* When the mode is switched to power mist while the timer
is operating, the configured timer cancels.

Timer Operation

¡Press the off timer button and set to a preferred time.
Each time the button is pressed, the indicator lamp sets to
the timer according to the lamp.
1 Hour 2 Hours
¡The indicators change according to the amount of time
that has passed and the lights indicate the amount of time
remaining.
¡Once the pre-determined amount of time passes, the
device automatically turns off.
* The power mist mode cannot be set with a timer.
Manual Operation
Press
Press
Continuous
8 Hours Operation
(The lamp does not turn on.)
Press