Silvercrest SFKS 2 B1 Operating Instructions Manual page 15

Slide the battery compartment cover 0 back
♦
onto the battery compartment 9 until it clicks
into place. Ensure that the sealing ring is
properly inserted into the frame of the battery
compartment 9. Otherwise, IP protection is not
provided.
To reattach the mounting plate q to the transmit-
♦
ter, hook one side of the transmitter into the gap
of the mounting plate q, then push the transmit-
ter downwards until it clicks into place.
NOTE
► If the performance of appliance reduces or com-
pletely stops, it means the battery is exhausted.
Replace the used battery with a new one of the
same type.
│
■ 12 GB
SFKS 2 B1