Power Prover - Curtis Acuity 1030 Manual

Curtis 1030 Acuity Manual,
the values on the left to the editable list on the right. The user
can then make any necessary changes before
Clear Values
entered by the user.
Save to File
the editable list on the right.
Reset State-of-Charge
Update Time & Date
of the real-time clock in the Acuity.
Power Prover (viewing & recording instantaneous data)
The Power Prover screen allows the user to view live data being transmitted
from the Acuity and to record that data on the host computer.
”
The Power Prover screen contains the following functions.
Two pull-down menus allow you to select the voltage scale
Select Scale
and the current scale to be displayed on the computer.
Select Data Logging Rate
computer can be selected using the drop-down menu. It is set in multiples of
PDO1 messages. The PDO1 transmission rate is 100 ms by default. It can be
reset using a CAN object.
Start Data Logging
surements into a file on the computer, at the rate set by
Reset AHr Counters
Ampere Hours Discharged, and "C" represents Ampere Hours Charged.
This is an identifier unique to that Acuity and therefore to that
Battery ID
battery.
Time of day as reported by the host computer.
Time-of-Day
Rev. C
This function removes all the values that were
Saves the parameters that have been entered into
Resets that value in the Acuity.
Allows the user to set the time and date
The rate at which data is recorded to a file on the
Begins storing data that is received from the Acuity's mea-
Resets the Ampere Hour counters to zero. "D" represents
3 — ACU-SET SOFTWARE
.
Save to File
.
Select Data Logging Rate
9