Weather Band And Weather Alert Operation; Setting Memory - Sangean DT400W Operating Instructions Manual

Setting Memory

Turn radio on using the On/Off button located on the
top of the radio.
Select desired band by pressing the "Band" selector
on the front of the unit.
Tune to desired station using either Manual Step
Tuning or Scan Tuning options.
Press Memory Button located on the front of radio unit
and use the tuning controls (Up/Down) to reach
memory position as indicated in the top-right of
the display.
Press Memory Button located on the front of the unit
to lock station into memory.
* There are 19 memory sets.
Weather Band and weather
alert operation
1. When that radio is on, press the WX button to switch
between AM/FM and Weather Band.
Then press TUNING UP or DOWN select the
Weather Band channel.
2. When the radio is in the Weather Band, press and
hold the WX button for more than 3 seconds to enter
the Weather Alert mode.
3. Press the TUNING UP or DOWN to select the
Weather Alert time (OFF , 4H, 8H, 16H or OFF).
1 1