Advertisement
Radio operation
1. Select the power to be Battery (make sure the batteries are in and
powerful) or Dynamo position by switching battery/dynamo switch.
2. Switch on the radio by turning the power/volume control.
3. Select required radio band (AM or FM).
4. For FM reception , pull out the telescopic antenna and rotary it
until you receive the best signal. For AM, align the antenna by
turning the radio for best reception and avoid interference from
computer , electronics devices etc.
5. Adjust the volume by rotary volume control.
Listening with earphones
Insert the earphones plug (3.5 mm, stereo) into the earphones
socket on the left side of the device.
This will automatically switches off the loudspeakers.
Backlight
The radio has a backlight next to the dial window, it will illuminate
when the backlight button is pressed and turn off automatically after
5 seconds.
GB
4
Advertisement
