Setting The Clock - Sangean DT400W Operating Instructions Manual

Setting the Clock

This unit features a clock that will display the current
time while off. To set the clock:
Turn unit off by depressing the power button located
on the top of the radio.
Press and hold MEMO or CLOCK button until the
hour setting begins blinking and the colon is no
longer blinking.
Select hour by using the Tuning Control Buttons
located just to the right of the display. Adjust UP or
DOWN accordingly until desired hour is displayed.
Press MEMO or CLOCK button once to set
the minutes.
The minute indicator should now be blinking. Using the
Tuning Control Buttons located just to the right of the
display. Adjust UP or DOWN accordingly until desired
minutes is displayed.
Once time displayed matches desired setting press
MEMO or CLOCK button once more.
Time should display solidly, with the colon
blinking periodically.
13