Using The Remote Controller; Power On/Off; Operation Mode And Set Temperature Settings; Operation Mode Setting - Mitsubishi Electric QAHV-N560YA-HPB Installation & Operation Manual

[3] Using the Remote Controller

<1> Power ON/OFF
During operation
During stoppage
<2> Operation mode and set temperature settings

Operation mode setting

Button operation
Unit1
F1 F2
Set temperature setting
Button operation
Unit1
F1 F2
Unit1 FRI
Press the [ON/OFF] button.
Next
The ON/OFF lamp will light up in green, and the operation will start.
Unit1 FRI
Pressing the [ON/OFF] button brings up a confirmation screen. When it appears,
press the [F3] button.
Next
The ON/OFF lamp will come off, and the operation will stop.
Press the [F1] button to go through the operation modes in the order of "Mode1,
FRI
Mode2, and Mode3."
Select the desired operation mode.
Next
F3 F4
Press the [F2] button to decrease the set temperature, and press the [F3] button
FRI
to increase.
Next
F3 F4
Mode1 Mode2
68
Mode3