Curtis TLP12A User Manual page 8

INSTALLATION INSTRUCTIONS
Powering Up the Brewer (cont.)
8
heating element will turn on automatically. Depending
on the incoming water temperature and the electrical
minutes to reach the factory set operating temperature.
control panel will come on.
IMPORTANT:
higher elevations, reduce the factory set
PROGRAMMING GUIDE.
9 Perform a brew cycle of a least 12 ounces to purge
any remaining air from the system. See OPERATING
INSTRUCTIONS. During the initial brew cycle and
water tank.
TLP, INSTALLATION INSTRUCTIONS
READY light on the
II19
112917A