Download Print this page

CBA RA-4961-PBQ Manual page 4

Wireless pushbutton

Advertisement

CBA Wireless Pushbutton
Also Available from SECO-LARM:
Wireless
Outdoor PIR Sensor
RA-4961-DSQ
Wireless
Indoor PIR Sensor
RA-4961-PRQ
FCC COMPLIANCE STATEMENT:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Notice:
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the
RF exposure requirements and void user's authority to operate the device.
LIMITED WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in
normal service for one (1) year from the date of sale to the original customer. SECO-LARM's obligation is limited to the
repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is
void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is
not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO
-
LARM and the purchaser's exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM's
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Trademarks
are the property of SECO-LARM USA Inc. or their respective owners.
Copyright © 2015 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
SECO-LARM
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800
4
®
U.S.A., Inc.
Wireless
Mailbox/Tilt Sensor
RA-4961-MBQ
Wireless Alert
System
RA-4961-K1Q
Website: www.seco-larm.com
Email: sales@seco-larm.com
Wireless
Magnetic Contact
RA-4961-MCQ
Wireless
Vibrating Receiver
RA-4961-VPQ
FCC ID: YAHDCX-800
MiRA-4961-PBQ_151001.doc
SECO-LARM U.S.A., Inc.
PIHVK1

Advertisement

loading