Page 1
® RA-4961-PRQ Wireless Indoor PIR Sensor Manual • For use with RA-4961 series receivers • Programmable activation time • Wirelessly monitor entryways, rooms, or • Runs on batteries for a convenient, other areas wireless installation • Up to 1,000ft (305m) transmission range* •...
CBA Wireless Indoor PIR Sensor Specifications: Model number RA-4961-PRQ Frequency 914.8MHz Transmission range* Up to 1,000ft (305m) Channels Power supply 1x 9VDC Battery (Not included) Current Standby 7µA draw 18mA 300 days (3 triggers/day) Estimated battery life Low battery indicator...
Page 3
CBA Wireless Indoor PIR sensor Installation: 1. Select the location where the sensor will be mounted. 2. The sensor should be mounted 6~9ft (2~3m) above the ground, have a clear view of the desired detection area, and be safe from water.
CBA Wireless Indoor PIR Sensor Installing the Battery: 1. Remove the cover by pushing down behind the tab on the top of the sensor and carefully pulling the cover away from the sensor body. 2. Connect a 9V battery to the battery connector.