CBA Wireless Alert System Table of Contents: Dimensions ..........2 Pairing Accessories ....... 6 Parts List ..........3 Deleting Paired Accessories ....7 Specifications ........3 Changing the Ringtone and Volume ..7 Overview ..........4 Setting the Notification Mode ....7 Installing the Receiver ......
CBA Wireless Alert System Overview: Receiver Front (Cover off) Speaker Notification light Channel notification Open the front cover. Volume control Channel Tone select select button button Battery compartment Side Rear Reset button 6VDC Input RESET Relay Wiring switches terminal Notification...
CBA Wireless Alert System Installing the Receiver: 1. Open the front cover of the receiver unit. 2. Determine how the receiver will be powered. Either insert three "C" batteries (observing correct polarity, not included) or connect to 6VDC power supply (not included). Low battery is indicated when the notification light flashes once every 5 seconds.
CBA Wireless Alert System Replacing the Pushbutton Battery: 1. Remove the front cover of the pushbutton by inserting a paperclip in the notch at the top of the unit. Push down on the paperclip with force and pull the top of the front cover from the pushbutton.
CBA Wireless Alert System Deleting Paired Accessories: 1. Enter programming mode by holding down the channel select button until the Channel 1 LED flashes on the channel notification panel. 2. Press the channel select button to cycle through channels until the desired channel is selected.
CBA Wireless Alert System Wiring an Auxiliary Device: 1. To connect an auxiliary notification device to channel 4, flip the left (relay) switch to "ON". 2. Flip the right (time) switch to 2 for a 2-second activation time or 5 for a 5-second activation time.