Download Print this page

CBA RA-4961-DSQ Manual

Wireless outdoor pir sensor

Download this manual

• For use with RA-4961 series receivers

• Wirelessly monitor driveways, walkways

or other areas

• Up to 1,000ft (305m) transmission range*

• Programmable activation time

* Transmission range will vary depending on installation and operating environment.

RA-4961-DSQ

Wireless Outdoor PIR Sensor

Manual

• Programmable sensing range up to

40ft (12m)

• Runs on batteries for a convenient,

wireless installation

• Adjustable mounting angle

Page 1 ® RA-4961-DSQ Wireless Outdoor PIR Sensor Manual • For use with RA-4961 series receivers • Programmable sensing range up to 40ft (12m) • Wirelessly monitor driveways, walkways or other areas • Runs on batteries for a convenient, wireless installation • Up to 1,000ft (305m) transmission range* •...
Page 2: Specifications
CBA Wireless Outdoor PIR Sensor Specifications: Model number RA-4961-DSQ Frequency 914.8MHz Transmission range* Up to 1,000ft (305m) Channels Power supply 4x AA Batteries (Not included) Current Standby 70µA draw 18mA Estimated battery life 300 days (3 triggers/day) Low battery indicator...
Page 3 CBA Wireless Outdoor PIR Sensor Installation: 1. Select the location where the sensor will be mounted. 2. The sensor should be mounted 6~9 feet (2~3 meter) above ground, have a clear view of the desired detection area, and be safe from water.
Page 4: Installing Batteries
CBA Wireless Outdoor PIR Sensor Installing Batteries: 1. Remove the sunshield from the sensor. 2. Using a screwdriver, remove the screws from the front Battery of the sensor and remove the cover. compartment 3. Place 4x AA batteries (not included) in the battery compartment, making sure to observe correct polarity.