Page 1
® RA-4961-PBQ Wireless Pushbutton Manual • For use with RA-4961 series receivers • Up to 1,000ft (305m) transmission range* • Easy installation • Can be used as a wireless doorbell * Transmission range will vary depending on installation and operating environment.
CBA Wireless Pushbutton Specifications: Model number RA-4961-PBQ Frequency 914.8MHz Transmission range* Up to 1,000ft (305m) Channels Power supply CR2032 Battery (Included) Current Standby 0.2µA draw Active 16mA Estimated battery life 400 days (3 triggers/day) Low battery indicator Zone LED on receiver blinks continuously...
CBA Wireless Pushbutton Installation: 1. Remove the front cover of the pushbutton by inserting a paperclip in the notch at the top of the unit. Push down on the paperclip with force and pull the top of the front cover from the pushbutton.
Page 4
CBA Wireless Pushbutton Also Available from SECO-LARM: Wireless Wireless Wireless Mailbox/Tilt Sensor Outdoor PIR Sensor Magnetic Contact RA-4961-MBQ RA-4961-MCQ RA-4961-DSQ Wireless Alert Wireless Wireless System Vibrating Receiver Indoor PIR Sensor RA-4961-K1Q RA-4961-VPQ RA-4961-PRQ FCC COMPLIANCE STATEMENT: FCC ID: YAHDCX-800 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.