I-novative 2-Port OABR Multi-Media-Switch User Manual page 8

2. Manual Driver Installation
You can also manually install the OABR Multi-Media-Switch drivers.
Proceed as follows:
• Download the latest driver from our website. There is always the latest driver provided:
http://www.i-novative.de/de/downloads
Alternatively, the driver is in the follwoing folder after installing the GUI: \Driver\
• Unzip the downloaded driver with a double click in the default directory of your C drive.
• Connect the USB cable to the PC and the OABR Multi-Media-Switch and switch on the
device (= with 12V supply voltage via the Tyco connector)
• After a short time comes a message in the system tray that a driver could not be installed
successfully.
• Now navigate to the „Device Manager" under the Windows Control Panel and search
the entry „OABR Multi-Media-Switch" under „Other Devices".
Please select „Update driver software":
• Click on the entry OABR Mulit-Media-Switch with the right mouse button and choose
„Search for driver software on the computer".
• Select the folder where you unpacked the driver before and click on „Next" afterwards.
• Select „Install".
• Finally, you will get the message „The driver software has been successfully updated".
page 8