Sniffing - I-novative 2-Port OABR Multi-Media-Switch User Manual

2.6.5. Sniffing

Sniff on Port: Specifies the port on which the traffic is output.
Port Settings:
• RX only: Only the incoming packets are forwarded to the sniffing port
• TX only: Only the outgoing packets are forwarded to the sniffing port
• RX and TX: Both the inbound and outbound packets are forwarded to the sniffing port
• Off: Packages at this port are not considered during sniffing
Dynamic MAC Table: Displays the dynamic MAC table for each port.
Refresh Mac Table: Read the table again from the device.
page 18