Table of Contents
Advertisement
2.7. Hardware-Configuration (DIP-Switch)
The OABR Multi-Media-Switch can also be configured for basic functions without GUI via the front
panel DIP selector switches:
2.8. Default settings
It may happen that your OABR Multi-Media-Switch is no longer accessible through user settings,
etc. In this case, you can use the following reset procedure to reset the device to the factory set-
tings (all settings and values of the device are lost!!):
Switch on the device. By using a non-conductive pointed article (e.g.toothpick), press the RESET
button through the small hole and hold it pressed for about 6 seconds. After that, the reset process
is completed and all settings are back to default.
page 24
DIP1:
off = OABR1-Slave;
DIP2:
off = OABR2-Slave;
DIP3:
not used
DIP4:
on = always on;
on = OABR1-Master
on = OABR2-Master
off = on@CAN-Activity
Hide quick links:
Advertisement
Table of Contents
