Return The Extender To Its Factory Settings - NETGEAR EX6400 User Manual

• If you did not enable the One WiFi Name feature, enter http://mywifiext.local in the
address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computer. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For information about how to find the extender's IP address, see
IP Address
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4. Select Settings > Other Settings.
The Backup Settings page displays.
5. Click the BROWSE button.
6. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX6400.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
7. Click the RESTORE button.
A confirmation pop-up window opens.
8. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.

Return the Extender to Its Factory Settings

To reset the extender to its factory settings, you can use the Factory Reset button or log in to
the extender and reset it to factory settings. For information about the factory settings, see
Factory Default Settings
AC1900 WiFi Mesh Extender Essentials Edition
on page 43.
on page 46.
Monitor and Maintain the Extender
36
Find Extender's