Page 1
Nighthawk X4 AC2200 WiFi Range Extender Mode l E X7300 Us e r Manual April 2016 202-11577-01 350 East Plumeria Drive San Jose, CA 95134...
Page 2
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Contact your Internet service provider for technical support.
Nighthawk X4 AC2200 WiFi Range Extender Contents Chapter 1 Get to Know Your Extender Front Panel and Side Panel LEDs and Buttons ......6 When to Use Your Extender .
Page 4
Nighthawk X4 AC2200 WiFi Range Extender Erase the Settings and Return to Factory Settings ..... 39 Update the Firmware ..........40 Restart the Extender Remotely .
Note: Firmware updates with new features and bug fixes are made available from time to time on downloadcenter.netgear.com. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, you might need to update your firmware.
Nighthawk X4 AC2200 WiFi Range Extender Front Panel and Side Panel LEDs and Buttons The LEDs are located on the front panel. A switch, buttons, and an Ethernet port are located on the side panel. Client Arrow LED Router Arrow LED Client Link LED Router Link LED Factory Reset button...
Nighthawk X4 AC2200 WiFi Range Extender Table 1. LEDs (continued) Description Client Arrow If no arrow LEDs are lit, the extender is in a good location. If the Client Arrow LED is blinking, move the WiFi-enabled device closer to the extender. Router Arrow If no arrow LEDs are lit, the extender is in a good location.
WiFi standards. However, to get the benefits of 802.11ac, your WiFi router must support the 802.11ac WiFi networking standard. To learn more about the 802.11ac WiFi networking standard, visit netgear.com/landing/80211ac/. Figure 3. Speed comparison between the 802.11n and 802.11ac standards Get to Know Your Extender...
Get Started This chapter covers the following topics: • Use the Extender in Extender Mode • Use the Extender in Access Point Mode • Access Extender Settings • Run Smart Setup...
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. Note: WPS does not support WEP network security. If you are using WEP security, follow the instructions in Connect With the NETGEAR Installation Assistant on page 12. Get Started...
Page 11
Router Link LED lights. If the Router Link LED does not light, try again. If it still does not light, see Connect With the NETGEAR Installation Assistant on page 12. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender to the 5 GHz band.
Page 12
Link LED turns solid green or amber. Connect With the NETGEAR Installation Assistant To connect with the NETGEAR installation assistant: Connect your device to the extender using a wired Ethernet or WiFi connection: • To connect with a wired Ethernet connection, use an Ethernet cable to connect the Ethernet port on the extender to an Ethernet port on your computer.
Page 13
Complete the registration fields and click the FINISH button to complete the setup. If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status page displays.
Page 14
Nighthawk X4 AC2200 WiFi Range Extender Use the Router Link LED to help you choose a spot where the extender-to-router connection is optimal. If the Router Link LED doesn’t light amber or green, plug the extender into an outlet closer to the router and try again.
Nighthawk X4 AC2200 WiFi Range Extender Use the Extender in Access Point Mode You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using a wired Ethernet connection. Figure 5. Extender as an access point ...
Nighthawk X4 AC2200 WiFi Range Extender Connect you WiFi-enabled device to the new access point WiFi network using the SSID and password that you created in Step 8. Click the CONTINUE button. A page displays that says you successfully created an access point. Click the NEXT button.
Page 17
Complete the registration fields and click the FINISH button to complete the setup. If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status page displays.
Extender Network Settings This chapter covers the following topics: • View Connected Devices • Boost Your Video Streaming With FastLane Technology • View WiFi Settings • Change the WiFi Network Name • Turn Off the SSID Broadcast to Create a Hidden Network •...
Nighthawk X4 AC2200 WiFi Range Extender View Connected Devices You can view a list of devices that are connected to the extender network. To view connected devices: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network.
Page 20
Nighthawk X4 AC2200 WiFi Range Extender When you enable FastLane Technology, two options are available: • Use the 2.4 GHz band to connect the extender to the WiFi devices and use the 5 GHz band to connect the extender to the WiFi router. Use this mode if your WiFi router supports the 5 GHz band but the devices that you want to use for gaming and streaming support the 2.4 GHz band.
Nighthawk X4 AC2200 WiFi Range Extender View WiFi Settings To view the WiFi settings: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network. Launch a web browser. Enter www.mywifiext.net in the address field of the browser. A login window opens.
Nighthawk X4 AC2200 WiFi Range Extender The Status page displays. Select Settings > Wireless. In each Network Name (SSID) field, type a network name. Click the SAVE button. Your settings are saved. Turn Off the SSID Broadcast to Create a Hidden Network By default, the extender broadcasts its WiFi signal so that its WiFi network names (SSIDs) are easy to find from your computer, tablet, or smartphone.
Nighthawk X4 AC2200 WiFi Range Extender Select Settings > Wireless. Clear the Broadcast the Network name (SSID) check box. Click the SAVE button. Your settings are saved. Disable or Enable the WiFi Radios By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If you disable the WiFi radios, then no one can connect with WiFi to the extender.
Nighthawk X4 AC2200 WiFi Range Extender Select Settings > Wireless. Select or clear the Enable 2.4 GHz WiFi check box. Select or clear the Enable 5 GHz WiFi check box. Click the SAVE button. Your settings are saved. Change the WiFi Speed ...
Nighthawk X4 AC2200 WiFi Range Extender Select Settings > Wireless. In each WiFi Speed menu, select a speed. Click the SAVE button. Your settings are saved. Use WPS to Add a Computer to the Extender’s WiFi Network WPS (Wi-Fi Protected Setup) lets you connect a computer or WiFi device to the extender’s network without entering the WiFi network passphrase or key.
Nighthawk X4 AC2200 WiFi Range Extender Use WPS With the Push Button Method For you to use the push button method to connect a WiFi device to the extender’s WiFi network, the WiFi device that you are trying to connect must include a physical WPS button or an onscreen WPS button that you can click.
Nighthawk X4 AC2200 WiFi Range Extender Launch a web browser. Enter www.mywifiext.net in the address field of the browser. A login window opens. Enter your user name and password and click the LOG IN button. The Status page displays. Select Settings > Do More > Connect Devices (WPS). The Connect Devices (WPS) page displays.
Page 28
Nighthawk X4 AC2200 WiFi Range Extender To use WiFi access control to deny access: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network. Launch a web browser. Enter www.mywifiext.net in the address field of the browser. A login window opens.
Nighthawk X4 AC2200 WiFi Range Extender Set Up an Access Schedule You can control WiFi access during specific periods of the day. You can set up an access schedule that prevents Internet access through the extender network based on the times that you set.
Nighthawk X4 AC2200 WiFi Range Extender Change the Extender’s Device Name The default name is EX7300. To change the extender’s device name: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network.
Nighthawk X4 AC2200 WiFi Range Extender A login window opens. Enter your user name and password and click the LOG IN button. The Status page displays. Select Settings > Wireless Settings. The WiFi Settings page displays. Scroll down and click the IP Address heading. By default, the Dynamically get IP Address From Router radio button is selected.
Page 32
Nighthawk X4 AC2200 WiFi Range Extender b. Enter www.mywifiext.net in the address field of the browser. A login window opens. c. Enter your user name and password and click the LOG IN button. The Status page displays. Select Settings > Connected Devices. The Connected Devices page displays the MAC addresses and virtual MAC addresses for computers and WiFi devices that are connected to the extender network.
Monitor and Maintain the Extender This chapter covers the following topics: • Change the Extender User Name and Password • Turn Password Protection Off and On • Recover a Forgotten User Name or Password • Automatically Adjust for Daylight Saving Time •...
Nighthawk X4 AC2200 WiFi Range Extender Change the Extender User Name and Password You can change the user name and password to log in to the extender. To change the extender user name: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network.
Nighthawk X4 AC2200 WiFi Range Extender Turn Password Protection Off and On We recommend that you leave password protection on to help keep your network secure. You can turn password protection off and on. To turn password protection off or on: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network.
Nighthawk X4 AC2200 WiFi Range Extender Click the BACK button. A login window opens. Log in to the extender. Automatically Adjust for Daylight Saving Time On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network. Launch a web browser.
Nighthawk X4 AC2200 WiFi Range Extender Back Up and Restore the Extender Configuration When the extender works correctly after initial setup, we recommend that you back up the extender configuration settings. After you back up the settings, if you change the extender configuration settings but are not content with the new settings, you can restore the extender configuration to the backed-up settings.
Nighthawk X4 AC2200 WiFi Range Extender Restore the Configuration Settings You can restore the configuration file of the extender to a previously saved configuration file. To restore the extender configuration settings: On your WiFi-enabled device, open the WiFi connection manager and locate and connect to the new extender WiFi network.
Nighthawk X4 AC2200 WiFi Range Extender Return the Extender to Its Factory Settings To reset the extender to its factory settings, you can use the Factory Reset button or log in to the extender and reset it to factory settings. For information about the factory settings, see Factory Default Settings on page 47.
Nighthawk X4 AC2200 WiFi Range Extender Select Settings > Other Settings. CAUTION: After you click the RESET button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting. Click the RESET button.
Nighthawk X4 AC2200 WiFi Range Extender Select Settings > Firmware Update. Click the CHECK ONLINE button. If new firmware is available, follow the onscreen prompts to download it onto your computer. Note: You might need to unzip the firmware file. Click the BROWSE button.
Page 42
Nighthawk X4 AC2200 WiFi Range Extender Select Settings > Other Settings. Click the RESTART button. When prompted, click the Yes button to confirm. The extender restarts, which takes about two minutes. Monitor and Maintain the Extender...
Nighthawk X4 AC2200 WiFi Range Extender FAQs This section provides answers for difficulties you might experience with the extender. The web browser setup keeps asking me for my network password (passphrase) or security key, and I am sure that I entered the correct password. What can I do? The extender is probably placed at the borderline of the range covered by the router or access point.
Nighthawk X4 AC2200 WiFi Range Extender Cannot Connect to the Extender If you cannot connect to the extender, determine what prevents you from connecting: • If you forgot your user name or password, click the Username & Password Help link. For more information, see FAQs on page 44.
Nighthawk X4 AC2200 WiFi Range Extender Factory Default Settings The following table includes the factory settings for the extender. You can use the Factory Reset button or the log in to the extender and reset it to these settings. (See Return the Extender to Its Factory Settings on page 39.)
Page 48
Nighthawk X4 AC2200 WiFi Range Extender Table 3. Technical specifications (continued) Feature Description Environmental • Operating temperature: 32° to 140°F (0° to 40°C) • Operating humidity: 90% maximum relative humidity, noncondensing • Electromagnetic emissions: Meets requirements of FCC Part 15 Class B Interface •...