NETGEAR EX6400 User Manual page 25

separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the
label of the WiFi device. If you cannot access the label, you can display the MAC address
using the network configuration utilities of the computer. You might also find the MAC
addresses on the Connected Devices page (see
To use WiFi access control to deny access:

1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local in the
address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computer. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example,
http://192.168.1.3)
For information about how to find the extender's IP address, see
IP Address
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4. Select Settings > Connected Devices.
The Connected Devices page displays.
5. In the WiFi Devices section, select the Enable Access Control check box.
The WiFi Devices table displays the names and MAC addresses of WiFi devices that are
connected to the extender.
6. Select the Deny check box for the device.
7. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender's WiFi network.
AC1900 WiFi Mesh Extender Essentials Edition
on page 43.
Extender Network Settings
25
View Connected Devices on page 18).
Find Extender's