Manually Set The Extender Clock; Back Up And Restore The Extender Configuration - NETGEAR EX6400 User Manual

The Access Schedule page displays.
5. Select the Automatically adjust for daylight savings time check box.
6. Click the SAVE button.
Your settings are saved.

Manually Set the Extender Clock

To manually set the extender clock:

1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local in the
address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computer. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For information about how to find the extender's IP address, see
IP Address
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4. Select Do More > Access Schedule.
The Access Schedule page displays.
5. In the Extender Clock section, select the Manual radio button.
6. To specify the time, complete the fields or click the Sync Clock button to synchronize the
extender time to the time on the WiFi-enabled computer or mobile device that you are using.
7. Click the SAVE button.
Your settings are saved.

Back Up and Restore the Extender Configuration

When the extender works correctly after initial setup, we recommend that you back up the
extender configuration settings. After you back up the settings, if you change the extender
configuration settings but are not content with the new settings, you can restore the extender
configuration to the backed-up settings.
AC1900 WiFi Mesh Extender Essentials Edition
on page 43.
Monitor and Maintain the Extender
34
Find Extender's