Remove And Replace Refrigerator Doors - Whirlpool WRF954CIHV Use And Care Manual

NOTE: Measure the width of your house door opening to see whether or not you need to remove the refrigerator doors to move the
refrigerator into your home. If refrigerator door removal is necessary, see the following instructions.
IMPORTANT: If the refrigerator was previously installed and you are moving it out of the home, before you begin, turn the refrigerator
control off. Unplug the refrigerator or disconnect power. Remove food and adjustable door or utility bins from doors.
Gather the required tools and read all instructions before removing doors.
TOOLS NEEDED: TORX
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Water Dispenser
Tubing Connection
A. Outer ring
Wiring Plug
Top Left Hinge
A
B
C
A. TORX T25 screws
® ®
B. Ground wire (Do not remove.)
C. Do not remove screws.
†TORX® and T25 are registered trademarks of Acument Intellectual Properties, LLC.
10
20-Jun-2017 10:09:25 EDT | RELEASED

Remove and Replace Refrigerator Doors

T25 screwdriver and a #2 Phillips screwdriver
® ®†
A
In some European factories the letter "W" of the part code mentioned herein will be automatically
WARNING
Electrical Shock Hazard
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Top Right Hinge
B
C
A
D
A. TORX T25 screws
® ®
B. Hinge cover screw
C. Top hinge cover
D. Top hinge
Door at 90° Angle
to Cabinet°