Using A Britax Infant Car Seat - Britax B-Mobile Stroller User Manual

Removing the Infant Car Seat Receivers
IMPORTANT: Infant car seat receivers must be removed in
order to fold stroller.
1. Press release button on inside of
receiver, and lift receiver upward.
NOTE: Store infant car seat receivers
in the pocket in the underseat basket
when not in use.
2. Replace arm bar by sliding it into the
receivers on either side of the seat.
Pull on arm bar to ensure it is securely
fastened. A click will be heard.
NOTE: Arm bar and stroller are marked
left (L) and right (R), from the position
of the stroller occupant.
18

Using a Britax Infant Car Seat

Attaching a Britax Infant Car Seat
1. Set the parking brake.
2. Line up the adapter on the infant car
seat with the receivers on the stroller.
3. Press down until locked into place.
4. Lift up on the infant car seat on both
sides to ensure that it is secure.
CLICK
Removing a Britax Infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.
19