Led Indicators; How Do I Restore The Modem To Its Factory Default Settings?; Safety Information - TP-Link TC-7610 Quick Installation Manual

LED Indicators

LED Status Indication
The modem is powered o .
O
(Power)
The modem is powered on.
On
The initialization is not started, or has failed.
O
The modem is synchronized with one channel.
White
(Downstream)
The modem is synchronized with more than one channel.
Green
The modem is scanning for downstream channels.
Flashing
The initialization is not started, or has failed.
O
The modem is synchronized with one channel.
White
(Upstream)
The modem is synchronized with more than one channel.
Green
Flashing The modem is scanning for upstream channels.
O Internet service is not available.
(Internet) On Internet service is available.
The modem is initializing.
Flashing
The LAN port is not connected.
O
The LAN port is connected.
(LAN) On
The LAN port is sending or receiving data.
Flashing

How do I restore the modem to its factory default settings?

With the modem powered on, press and hold the Reset button on the rear panel until all LEDs turn
on momentarily, then release the button.
Reset Button
Reset Reset
Reset Press & Hold for 5 seconds
Reset
LAN LAN
LAN
LAN
LAN
Cable
Cable
Power
Power
Cable

Safety Information

Cable
Cable
The product should be connected to cable distribution system that grounded (earthed).
Power
Power
Power ©2016 TP-LINK