A comprehensive range of accessories is available in our assortment. PROXXON will not be liable for the safe function of the device for: 2.2 Scope of delivery • handling that does not comply with the usual intended use, •...
Page 5
ON button. 2.4 Technical data and equipment features of the 4.1 Height adjustment of the spindle and/or the Z FF 500/BL in overview carriage (Fig. 5) • Voltage: 230 volt, 50/60 Hz The milling spindle, or the Z carriage, of the FF 550 can be adjusted •...
Page 6
The work piece to be processed must always be securely fastened to the cross table! There are various possibilities available to you: Clamping jaws (e.g. 24 257 from PROXXON), vices (e.g. 24 255 from Caution! PROXXON) are very well suited. If divisions are to be manufactured, it You must disconnect the plug from the power socket to prevent unin- is possible to work with dividers or feed receivers, for example.
(2-5 mm) 24610 or - for lar- ger work - the end mill cutter set (6-10 mm), article no. 24620. You will fi nd further suitable milling and drilling tools in PROXXON quali- Name and address of the manufacturer: ty from our comprehensive program in specialist shops or at www.prox-...
Page 8
Spare Parts List PROXXON FF 500/BL ET - Nr.: Description: 5 0 0 D r e h z a ø ( h l ( U / m i n ) S ta A lu m in iu m ts to...
Page 9
Spare Parts List PROXXON FF 500/BL ET - Nr.: Description: ET - Nr.: Description: - 57 -...
Page 10
Spare Part List PROXXON FF 500/BL ET - Nr.: Description: 17 16 18 18 16 - 58 -...
Page 11
Spare Parts List PROXXON FF 500/BL ET - Nr.: Description: - 59 -...
Page 12
Spare Parts List PROXXON FF 500/BL ET - Nr.: Description: ET - Nr.: Description: - 60 -...
Page 13
36.1 19.1 14.1 5 0 0 D r e h z a 41.1 ø (m h l ( U /m in ) S ta A lu m in iu m ts to - 61 -...
Page 14
Service note All PROXXON products are thoroughly inspected after production. Should a defect occur nevertheless, please contact the dealer from whom you purchased the product. Only the dealer is responsible for handling all legal warranty claims which refer exclusively to material and manufacturer error.