Connecting The Converter To Ac Power; Turning The Converter On/Off - Radio Shack 15-1981 Owner's Manual

Caution: To avoid damaging your
converter, make sure your converter is
not connected to an AC outlet before
setting
IRC/HRC/STD
Note: If you are not sure what type of
channel frequency system your cable
system uses, contact your local cable
company.
If the cable system in your area is not
standard, use a paper clip or other
pointed object to set
the bottom of the converter for the
type of cable system you have.
Note: HRC and IRC are methods
used by some cable companies for
converting satellite and local broad-
cast channels to cable channels.
Channels 5 and 6 on IRC systems and
all channels on HRC systems are
slightly different frequencies from
those used on standard systems.
.
on
IRC/HRC/STD
CONNECTING THE
CONVERTER TO AC
POWER
Plug the converter's power cord into a
standard AC outlet.
TURNING THE
CONVERTER ON/OFF
To turn the converter on or off, press
on the front of the converter or
POWER
on the remote control.
5