Testing And Further Information; Testing The Battery And Final Adjustments; Service And Support - Sennheiser SDW 10 HS Assembly & Disassembly Instructions

3

Testing and further information

3.1 Testing the battery and final adjustments

1. Test the function of the headset: Press the Hook button to switch on the
headset. The LED lights up blue.
2. Remount the headband or earhook. See User Guide for further
information.
3. Charge the battery for at least 20 minutes before using the headset. See
User Guide for further information.
4. Switch off the headset before sending it to the customer. Press and hold
the Hook button for 5 seconds. The headset switches off. The Headset
LED flashes red 3 times and turns off.
3x

3.2 Service and support

System
Sennheiser Service Support Center
(Case Management System)
Sennheiser ServiceNet
Service Information updates and
Service Support Database
ASSY 180118 | MAY 2018
5s
Contact
E-mail address:
support@sennheiser.com
Website:
https://www.se-servicenet.com/portal/contact.php
SDW 10 HS
Testing and further information
11 | 11