Advertisement
1.
UNPACKING
Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or
postal authority and a request for a damage report should be made.
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED DAMAGE.
THE FORM FOR FILING SUCH A CLAIM WILL BE PROVIDED
BY THE CARRIER.
GENERAL INSTALLATION AND OPERATION INSTRUCTIONS
1. Protective Film - Carefully remove the protective film from
the stainless steel before using oven for the first time. If any
glue residue should remain, remove it with a suitable solvent
recommended for stainless steel. It is important to remove this
film before installation and use; otherwise it will stick onto the
stainless steel and become very difficult to remove thereafter.
2. Positioning - Install the oven in the most convenient location
for ease of cleaning, maintenance and general operation. The
unit should be placed a minimum distance of 100mm from
any adjacent wall. If this appliance is to be positioned in close
proximity to walls, partitions, kitchen furniture, decorative
finishes, etc. they must be made of non-combustible materials.
If not, they shall be clad with a suitable non-combustible heat
insulating material and the closest attention should be paid to the
fire prevention regulations. It is important to observe the
recommended space at the top of the oven due to the exhaust
air vent duct/chimney being positioned at the top of the unit. Hot
exhaust gas can create a fire hazard.
3. The oven requires a three-phase connection. Please consult a
qualified electrician.
4. Earthing - ANVIL Combi Oven require a suitable earth
connection.
18.
Advertisement
