Download Print this page

Anvil COA 1020 Installation Operation And Care page 12

Heavy duty electric combi oven

Advertisement

9.
SAFETY
READ ALL INSTRUCTIONS BEFORE USE. FAILURE TO
FOLLOW THESE PRECAUTIONS COULD RESULT IN INJURY TO
YOURSELF AND OTHERS
1.
When these ovens are to be positioned in close proximity
to a wall, partitions, kitchen furniture, decorative finishes, etc.
it is recommended that they be made of non-combustible mate-
rial. If not, they shall be clad with a suitable non-combustible
heat insulating material, and the closest attention be paid to fire
prevention regulations.
2.
Ensure that the equipment and the power supply cord does not
come into contact with hot surfaces.
3.
Supervision is necessary when the appliance is used in close
proximity to children.
4.
Use only earthed outlets matching the serial plate voltage.
5.
Have equipment installed by a qualified personnel in accordance
with local codes and ordinances.
6.
Use equipment in a flat level position.
7.
Do not stand on left side of the door when opening as the steam
and heat will escape and may cause burns.
8.
The equipment may be hot, even though the pilot light is not on.
9.
Do not operate if equipment has been damaged or is malfunc-
tioning in any way.
10. This oven is designed to run only on alternating current (A.C.)
DO NOT CONNECT TO DIRECT CURRENT (D.C)
ELECTRICAL CONNECTION INFORMATION
MODEL
DESCRIPTION
COA1020
HEAVY DUTY ELECTRIC
20 PAN COMBI OVEN
COA1040
HEAVY DUTY ELECTRIC
40 PAN COMBI OVEN
VOLTS
POWER
(V /Hz)
(W)
380V/50Hz
37 000
3Phase with
NEUTRAL & EARTH
380V/50Hz
53 000
3Phase with
NEUTRAL & EARTH
10.

Advertisement

loading

This manual is also suitable for:

Coa 1040