Authentication Server Related Set/Modify - Samsung OfficeServ ITP-5012L User Manual

3-10 Chapter3 Getting Started
Set the IP address of TFTP server that the user wants to upgrade and then press
the [Enter] button.
♦ The '4.Format' menu is used to delete the current program values or its
relevant flash information.

Authentication Server Related Set/Modify

From the Setup menu, '5.Server' menu is used to set or modify the associated
values of the authentication server which in this case is the IP address of the
OfficeServ system. After selecting '5.Server' to the following sub menu will be
displayed.
Server (1/3)
1.Server IP
2.ID
3.Password
♦ The '1.Server IP' menu is used to set or modify the IP address of the
authentication server. If moved to its sub menu, the LCD panel will show the
following message:
* Input ServerIP
xxx.xxx.xxx.xxx
Check if there is any currently saved IP address for the authentication server on
the LCD panel. If IP address has not been set, the LCD panel will show nothing.
The user can enter the server IP address by using the dial buttons and [*] button to
enter '.'.To save the setting by pressing the [Enter] button.
♦ '2. ID' and '3. Password' are the user information to access to the server.
* ID
SAMSUNG