Entering Characters; Table A.2 Location Of Alphabet Letters On Dial Buttons - Samsung OfficeServ ITP-5012L User Manual

Entering Characters

The following dial buttons are used for entering characters. Press the left/right
direction buttons to move a cursor. Then, modify or insert the desired characters.
Entering Alphabet
Press the [Menu] button repetitively to select character input mode.
The location of alphabet letters on dial buttons is described as follows:

Table A.2 Location of Alphabet Letters on Dial Buttons

Dial
Alphabet
Button
1 Q Z
4 G H I
7 P Q R S
*
♦ Press the button repetitively until the desired alphabet letter appears.
e.g.) Press the button [5] twice to enter K.
Press the button [7] four times to enter S.
♦ To enter another alphabet letter from the same button sequentially, enter the
first alphabet letter, wait for about 3 seconds, and then press the button again.
♦ Perform the following procedure to insert blank.
−
Press the right direction button to insert blank.
−
To insert blank between the entered characters, press the left/right
direction buttons to move a cursor to a character that will be right next
to the blank, and press the dial button [0] once.
♦ Press the [Cancel] button to delete any characters. Press the [Cancel] button
briefly to delete the character left to the cursor one by one. Press the [Cancel]
button for more than 2 seconds to delete all characters left to the cursor.
Dial Button Alphabet
2 A B C
5 J K L
8 T U V
0
A-3
Dial Button Alphabet
3 D E F
6 M N O
9 W X Y Z
#