Overview; Contacting Technical Support; Before Beginning - PROCEED AVP Quick Manual

Overview

The following information will guide the installer through simple set up and programming for RS-
232 control of a Proceed AVP.
Please read through the entire document before attempting to control an AVP via RS-232.
Should you have any questions about RS-232 control of an AVP please contact Madrigal Audio
Labs Technical Support.
Contacting
Technical
Support

Before Beginning

Before you begin the setup of the AVP for RS-232 control make sure the following items are at
hand.
AVP with the correct software version. See Software Revision Section below
o
Control Device being used to control the AVP.
o
Owners Manual for the control device being used.
o
AVP Owners Manual to familiarize yourself with the AVPs functions.
o
Cable to connect the AVP to the Control Device. See RS-232 Control Cable below
o
Layout of the functions you intend to use on the AVP.
o
Knowledge of this document and the Control Device being used.
o
AVP RS-232 Quick Guide
Phone 860-346-0896
Fax 860-347-6251
Email madts@harman.com
9am to 5pm EST Monday thru Friday
Please allow 24hrs for reply
Please allow 24hrs for reply
Page 1