PROCEED AVP Quick Manual page 14

Status Response
Packet 2
Packet 3
Packet 4
Page 12
Main Zone Audio Source Number – Packet 2 shows the current source selected in
the main zone. The following table shows the hex value returned and the source
button it represents. The AVPs More inputs are represented but do not have an
associated front panel source button. A list of the more inputs programming should
be kept for reference.
Hex Returned
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
Not Defined – Packet 3 is not defined and thus has no information on system status.
This packet will always return a 08h.
NOTE: The hex value of this packet is the hex value for a backspace. Due to this
certain programs will need to set up to ignore a backspace or the previous packet
will be eliminated from the response. Please refer to the manual for your RS-232
control system on how to turn off the backspace if needed.
Main Zone Video Input Number – Packet 4 shows the current video source of the
AVP. Sources that have a video input defined in setup will follow the table described
in packet 2 above. Sources with no video input defined will show a value of 82hfor
packet 4 indicating that the current source from packet 2 is audio only.
Input # Front Panel Button Label
1 VCR1
2 DISC1
3 VCR2/DISC2
4 TV/AUX
5 SAT
6 CD
7 TAPE
8 AUX
9 TUNER
MORE 1 NONE
MORE 2 NONE
MORE 3 NONE
MORE 4 NONE
MORE 5 NONE
MORE 6 NONE
MORE 7 NONE
MORE 8 NONE
AVP RS-232 Quick Guide