PROCEED AVP Quick Manual page 16

Status Response
Packet 10
Packet 11
Packet 12 to 15
Page 14
Status Bits – The value of packet 10 shows the current status of certain AVP
parameters. The parameters include standby state and THX mode as well as others.
Certain values in this packet have no meaning and are not listed. Any value not
listed should be ignored.
NOTE: The hex values will be added together should 2 or more parameters be meet.
Example: THX ON (40) and SUB ON (80). These values would be displayed as C0h.
Hex
Value
01
02
08
10
40
80
Surround Mode – Packet 11 shows the current surround mode of the AVP. The
following table lists the hex values and associated surround mode.
Hex Value
00
01
02
03
04
05
06
Front Panel Led Image – The values of these packets are for AVP internal use and
have no real world correlation. The values of the packets should be ignored.
Status
2-channel signal. This also includes AC-3 2.0.0
Standby
AVP is displaying the setup menu. Packets 16 to 17
will indicate an ASCII display of OSD ACTIVE
10db DTS boost. This value will only appear on older
DTS discs as DTS has now added the 10db boost to
all DTS encoded material
THX ON
SUB ON
Surround Mode
Discrete AC-3 or DTS
Pro Logic
Pro Logic with THX
Stereo Surround
Mono Surround
2 Channel Surround OFF
Mono
AVP RS-232 Quick Guide