Viewing The Various Functions On Your System; Setting The Clock - Samsung MAX-ZL65 Instruction Manual

Viewing the Various Functions on
Your System
GB
You can view the various functions available on your system.
1
Press the Demo button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
2
To cancel this function, press Demo again.
On/Standby
10
Demo
PTY
RDS
Display
Timer
/Clock
Preset/
Mono/ST Memory

Setting the Clock

Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Enter.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Enter.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
You can also use Program/Set button on the remote control
to instead Enter button in step 3, 5, 7.
You can also use /
knob in step 4, 6.
On/Standby
Demo
1 PTY
RDS
Display
Timer
/Clock
2
Preset/
Mono/ST
Memory
Deck 1/2 REV.Mode
REC/Pause
Down
Up
Tuning Mode
Turn the Multi Jog knob to the...
Right
Left
Turn the Multi Jog knob to the...
Right
Left
buttons to instead Multi Jog
Volume
+
_
CD
Program
Repeat
TUNER CD
Band
D / P / S
DIRECT PLAY & SELECTION
Shuffle
TAPE
3,5,7
AUX
Enter
Dubbing
CD
Synchro
Normal HI - Speed
CD–R/RW PLAYBACK
4,6