Viewing The Various Functions On Your System; Moving Jog Function; Setting The Clock - Samsung MAX-VN75 Instruction Manual

Viewing the Various Functions on
Your System
GB
You can view the various functions available on your system.
1
Press the Demo button.
Result: The various functions available are listed in turn on the dis-
play.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sec-
tions.
2
To cancel this function, press Demo again.
On/Standby
Game
Demo
AUX
Timer/
Clock
Echo
NTSC/PAL
MICMixing
Return
Band
Min Max
Phones
TUNER
Rev Mode
Dolby NR

Moving Jog Function

Your mini-compact system has an improved Moving Jog Function,
including visual effect on standard jog function.
Each time you press Tuner, CD or Tape buttons, Moving Jog will
move automatically to a selected function.
Moving Jog will always return to CD position at standby.
Be cautious not to move Moving Jog excessively or give extreme
force. It will likely be the major cause of malfunction.
Timer/
Clock
NTSC/PAL
g
Return
Band
ax
TUNER
Rev Mode DECK 1/2
Dolby NR Counter Reset
Dubbing
Normal High
CD REC/Pause
10
Select /
VCD / CD
Moving Control Manual EQ /Enter
DECK 1/2 Mono/ST
Counter Reset Preset/Memory
Select /
VCD / CD TAPE
Moving Control Manual EQ /Enter
Mono/ST Program
Preset/Memory CD Repeat
— +
REC/Pause Shuffle CD Synchro
Menu Menu
Preset/Manual

Setting the Clock

Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from
winter to summer time and vice verse.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Manual EQ/Enter.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Manual EQ/Enter.
Result: The minutes flash.
TAPE
6
To...
Program
Increase the minutes
CD Repeat
Decrease the minutes
7
When the correct time is displayed, press Manual EQ/Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another function,
by pressing Timer/Clock once.
1
On/Standby
AUX
Echo
2
MICMixing
Min Max
Phones
—
MIC 1
Turn the Moving Jog knob to the...
Right
Left
Turn the Moving Jog knob to the...
Right
Left
Disc 1 Disc 2
Game
Demo
Timer/
Clock
NTSC/PAL
Return
Band Select /
TUNER VCD / CD
4,6
Moving Control Manual EQ /Enter
Rev Mode DECK 1/2 Mono/ST
Dolby NR Counter Reset Preset/Memory
—
Dubbing REC/Pause
Menu Menu
Preset/Manual
Disc
Disc 3
V
3,5,7
TAPE
Program
CD Repeat
+
Shuffle CD Synchro